Small 100W digital display multi-functional electric stirrer

Mini100W Digital Display Multi-functional Electric High-Speed Laboratory Mixer

I. Product Features:

The Mini 100W Digital Display Multi-functional Electric High-Speed Laboratory Mixer is equipped with a permanent magnet DC motor, featuring functions such as torque boosting, stable rotation speed, and low noise. The stirring rod is made of stainless steel. It is also equipped with a control box, allowing operation away from the workbench.

II. Technical Parameters:

1. Power Supply: Single-phase AC, 220V±10% 50Hz

2. Motor Voltage: DC 12V

3. Motor Power: 60W, 90W, 120W, 160W, 200W

4. Rotation Speed: 0-3000 rpm, adjustable

5. Timing: 0-120 minutes

6. Noise: Less than 40 decibels

III. Usage Instructions:

This series of instruments is easy to operate. First, familiarize yourself with the manual and the functions of each part of the control box panel, install all components, adjust the height as required, and then connect the power supply to start working.

IV. Precautions:

a. During use, if the stirring is found to be eccentric or unstable, adjust the tightening chuck to make the stirring concentric. If using an Erlenmeyer flask for stirring, align the stirring rod with the center before turning on the machine.

b. If the power suddenly cuts off during use, check if the power plug is loose or disconnected, or if the fuse is blown. If none of the above situations apply, please contact the manufacturer.

c. For safe electricity use, this product uses a 220V AC power supply. The power socket should be a three-hole safety socket and must be properly grounded.

B*** Electric Mixer

*** Type (JB Type) Electric Mixer: Adds a mechanical reduction device on the basis of the torque-boosting type, to enhance output torque (high torque output at low speed, good continuous operation performance). It is suitable for testing and production fields such as industry, biology, physical chemistry, cosmetics, health products, and food, and is an ideal test equipment for mixing liquid test media. This product consists of a series-excited motor with large starting torque, high rotation speed, and soft mechanical rotation speed, plus a low-noise reduction mechanism as the main unit, and is equipped with a control part, making it have the characteristics of large output power, low noise, reliable operation, smooth speed regulation, and convenient use. It is suitable for use by production enterprises and units in heavy industry, light industry, chemical industry, pharmaceutical industry, scientific instruments, etc.

Detailed Parameters

I. Speed Regulation

a) Check if the power supply voltage matches the rated voltage of the mixer.

b) Connect the motor's lead wire to the electronic speed controller.

c) After connecting the electronic speed controller to the motor, adjust the rotation speed. At this time, check if the speed adjustment knob is at the starting position. Do not install the stirring rod to ensure safety. Plug in the power plug, turn on the electronic speed controller's power switch, and adjust the motor to 60 rpm clockwise. Check if the rotation speed is uniform; if it is stable, it can be used.

d) Install the stirring rod on the chuck, tighten it, and then it can be put into production.

II. Use and Maintenance

1. This machine uses a three-core sheathed flexible cable, and one yellow core wire must be firmly grounded to ensure safety.

2. To check or replace the brushes, first disconnect the power supply. The new brushes should be able to slide freely in the brush holder. Tighten the brush cap. (Generally, when the remaining length of the brush is about 6 mm, it needs to be replaced with a new one.)